Iris Power Robotic Inspection Vehicle – (RIV800)

Автономная низкопрофильная роботизированная система для машинного тестирования, инспекции и обработки изображений
 

The Iris Power RIV800 Robotic Inspection Vehicle and Camera System, allows a visual inspection of the generator stator and rotor, including checking the air vents for debris, with or without removing the rotor. The robotic inspection vehicle also provides an automated means of EL CID™ low-flux core testing and SWA stator wedge analyzer testing.

The magnetically supported Robotic Inspection Vehicle (RIV 800) has been developed to provide an automated scanning method for the EL CID™ Evolution  stator core interlaminar insulation test equipment. The vehicle allows scanning of the stator bore of a generator or large motor, in order to test the integrity of the stator lamination insulation out more efficiently. The equipment can also be adapted to carry other lightweight attachments for stator inspection including the mini-camera or wedge tightness probe. A single control unit is used to provide power and control to the vehicle and camera module.

The RIV 800 is primarily designed for automated testing stator cores with EL CID™ low-flux core tester with the rotor removed however, is also can be used to test machines by insertion into the air-gap with the rotor in place if the rotor retaining ring to stator gap is sufficiently large. The new RIV 800 controller has been developed in collaboration with a University of Toronto Laboratory.

Система Iris Power RIV Camera обеспечивает гибкую систему инспектирования крупных генераторов, используя ротор-на-месте. Онa устанавливается на роботизированное транспортное средство Iris Power, которое можно перемещать по слотам статора. Система камеры включает встроенный свет. Камера и свет направлены на зеркало 45 °, которое можно дистанционно поворачивать на 360 °, чтобы можно было сканировать статор или ротор, а также смотреть вперед вдоль воздушного зазора. Камера также может быть сфокусирована дистанционно. Роботизированная инспекционная машина позволяет визуально проверять статор и ротор генератора, включая проверку вентиляционных отверстий для мусора, с удалением ротора или без него. Видеовыход отображается на встроенном мониторе цветного TFT-монитора 150 мм в блоке управления. Композитный видеовыход предназначен для подачи на второй монитор или видеомагнитофон.

Двигатель
Гидрогенератор
Турбогенераторы
Работайте со следующими активами

Возможности

  • Reduce overall cost of maintenance by providing faster testing with only one operator
  • Magnetically self supporting on steel surface to reduce human fatigue, stress and accessibility concerns
  • Fits into the 35 mm air gap for rotor-in-place testing
  • Guidance system detects the edges of the stator teeth to follow a straight line and measures distance using an encoder wheel.
  • Подстройка под кривизну у сердечников разных диаметров
  • В автоматическом режиме инспекционный робот может остановиться на заданном расстоянии, а затем начать движение в противоположном направлении
  • Variable speed adjustment

 

Benefits of the Camera System

  • Visually inspect stator and rotor for defects and damage with rotor in place with a low profile of 30mm
  • Focus on the stator core surface, stator air vents, or rotor surface
  • Scans image while conducting wedge tightness or ELCID test
  • Fits to the Robotic Inspection Vehicle for moving along stator slots
  • Assists positioning for Rotor-in-Place wedge tightness testing
  • Visual inspection for debris in the air-gap
  • Image can be adjusted for 360-degree angle and focus
  • Built-in dual light source

Варианты

  • Миниатюрный датчик SWA для определения герметичности клина
  • 20, 25, 35cm flat Chattock sensors for EL CID™ low-flux core testing